Shrink Tube Example
Shrink Tube is an easy way to mark and identify your wires and cable. Shrink tube supply comes in a roll for printing in the DuraLabel 4TTP.
Print your identifying information on the shrink tube, slip the shrink tube over the cable or wires you wish to identify, then use a heat gun to shrink the tube.
Shrink tube comes standard in white. It is also available in black and yellow but may require a minimum purchase quantity in those colors (especially black).
Shrink tube sizes are based on the diameter of the open tube before shrinking. When laying flat for printing, the shrink tube will be approximately 1.5 times as wide as it's open diameter.
This is a very flexible, specially formulated cross-linked polyolefin with a low recovery temperature, 3:1 shrink ratio, thin wall, and high flame retardance (VW-1)
|
Part Number
|
Open
Diameter |
Minimum
Expanded ID inches mm |
Maximum Recovered ID
inches mm |
Recovered Wall Thickness inches mm |
|
70125
701875 7025 70375 7050 7075 7100 |
1/8"
3/16" 1/4" 3/8" 1/2" 3/4" 1" |
0.125
3.18
0.188 4.76 0.250 6.35 0.375 9.53 0.500 12.70 0.750 19.05 1.000 25.40 |
0.042
1.06
0.063 1.60 0.083 2.12 0.125 3.18 0.166 4.23 0.250 6.35 0.333 8.47 |
0.023 +/- 0.003
0.58 +/- 0.08
0.023 +/- 0.003 0.58 +/- 0.08 0.023 +/- 0.003 0.58 +/- 0.08 0.024 +/- 0.003 0.61 +/- 0.08 0.024 +/- 0.003 0.61 +/- 0.08 0.024 +/- 0.003 0.61 +/- 0.08 0.024 +/- 0.003 0.61 +/- 0.08 |
You will need Windows Media Player to view this file.