The DuraLabel PRO Saves You Money On Pipe Markers & More

The DuraLabel PRO can handle all of your pipe marking needs… from making tags for small pneumatic tubing, to labeling 60 inch insulated discharge pipes. Plus, it does a lot more, making this versatile printer the economic choice for facility labeling.

Call 1-888-326-9244 today! DuraLabel PRO Supplies For Pipe Markers:

1. DuraLabel PRO Continuous Vinyl. Pipe marker labels are generally made using self-adhesive continuous vinyl. The DuraLabel PRO has all the colors required by code for making pipe markers, in widths from 1/2 inch up to four inches. Four inch labels are used on pipes with an outside diameter (including insulation and lagging) of ten inches or more.

DuraLabel PRO vinyl comes in 140 foot rolls. Because the DuraLabel PRO opens wide, providing easy access, tapes can be quickly loaded into the printer along with the appropriate color ribbon. Your pipe markers can then be conveniently and easily printed using one of the many Microsoft Word and Excel templates included with the DuraLabel PRO.

DuraLabel PRO tapes have a permanent adhesive that stays stuck. You can count on a long life from DuraLabel vinyl tapes.

2. Pipe Grabber Pipe Marking Sleeves. What do you do when you need to label and oily, dirty, rusty or greasy pipe? The answer is to use Pipe Grabber pipe marking sleeves.

A Pipe Grabber is a clear plastic "sleeve" that fits over a pipe. It has a built-in curl so that it will snap into place, tightly curling around the pipe. Pipe marker labels can be applied to the Pipe Grabber, which provides the clean surface needed for good adhesion. The result is an effective, durable pipe marker.

Pipe Grabber sleeves (shown to the right) are made from a clear plastic and are available in five sizes ranging from one inch to four inches.

In addition to labeling dirty and oily pipes, they are also used for temporary labels during construction or maintenance.

DuraLabel PRO Supplies For Other Applications:

1. Valve Tags. Valves need to be marked using the same standards as pipes. In most cases it is not practical to label valves using self-adhesive labels. Instead valve tags are used. Valve tags are flat, heavy-duty plastic color coded tags that provide a flat surface to which a label may be attached. The tag is attached to the valve using a plastic or wire tie.

2. OSHA Safety Labels & Signs. The DuraLabel PRO has the supplies you need to make safety signs and labels, as they are needed. It is the label printer that gets the job done!

From DANGER signs to NOTICE signs, the DuraLabel PRO can what you need. Whether it be a 20" X 24" reflective parking lot sign, as shown here, or warning labels for hazardous materials, the DuraLabel PRO has the supplies. When a safety problem is identified, don't delay, make the labels and signs you need, when they are needed.

3. Warehouse Labels & Signs. Rack labels, aisle markers and temporary inventory labels, the DuraLabel has the supplies needed for warehouse labeling. After pipe marking, one of the most common uses for the DuraLabel PRO is warehouse labeling. Some of the materials used for warehouse labeling include:

• Industrial grade 3.0 mil vinyl produces durable, permanent labels and signs.

• Repositionable vinyl produces labels that can be removed and applied again.
• Cold storage supplies make labels that can be applied at low temperatures.
• Reflective vinyl makes excellent low light signs.
• Bar codes can be printed on any of the labels materials available for the DuraLabel PRO.

Whatever your warehouse labeling needs, count on the DuraLabel to get the job done. Give us a call today at 1-888-326-9244 to learn how the DuraLabel PRO can take on the tasks of pipe marking, making OSHA safety signs and providing the labels and signs you need throughout your warehouse.

4. Arc Flash Warning Labels. Over the past few years the severity of arc flash hazards has become recognized and along with this the need to arc flash warning labels. DuraLabel supplies provide a number of arc flash labeling solutions, including:

• Die-cut labels with preprinted headers available in English or Spanish
• Two-color self-adhesive vinyl that provides flexibility in label size.
• Single-color self-adhesive vinyl that provides complete flexibility for label design and size.
• The ability to tile strips of vinyl to make nearly any size arc flash sign

5. RTK Labels. Die-cut RTK labels are available in a variety of sizes and in two formats. One format uses the NFPA Diamond the other uses color bars. Both formats conform to standards and present information in an easy-to-read and understand format.

6. Reflective Labels & Signs. The DuraLabel has a wide selection of specialty supplies available. One of the most popular is reflective vinyl. Used for making both indoor and outdoor signs and labels, reflective vinyl provides high visibility under low light conditions. (See picture of reflective parking lot sign above.)

7. Wire & Cable Labels. The DuraLabel has the supplies need to make large signs, such as the reflective parking lot sign above, and small labels such as the labels used to mark wires and cables. Two types of labels are available for wire and cable labeling. Shrink tubing and self-laminating wire wraps. Shrink tubes are placed on the wire before it is terminated and are heat shrunk to a tight fit. Self-laminating wire wraps may be applied at any time and do not require electricity (for a heat gun) to apply.

Other DuraLabel PRO supplies include:

• Glow-In-The-Dark Tapes
• Die-Cut Labels With Preprinted Headers
• Blank circle, oval and rectangle die-cut labels
• Polyester Tapes (For greater flexibility)
• Super Tough DuraTag Tag Stock
• Metallized Poly Tapes
• …and others

Call today at 1-888-326-9244 to learn more about the DuraLabel PRO, DuraLabel supplies, and how the DuraLabel PRO can make your job easier.