DuraLabel Supplies include
a wide range of supply
types.
(Click on the above buttons
for more DuraLabel Supplies information.)
DuraLabel supplies are only available direct from the manufacturer. By eliminating the middleman we are able to cut your labeling and sign making costs by about 50%. In addition, we typically ship orders the same day if we receive them by 3:30 pm PST.
Overview of DuraLabel Supplies
DuraLabel PRO Vinyl Tapes
 DuraLabel 3.0 mil Vinyl
- Adhesive backed continuous vinyl is the most commonly used material for making labels and signs. It combines durability, high quality and versatility making is suitable for a large number of applications. DuraLabel industrial grade vinyl is available in six widths and over 30 colors,
DuraLabel vinyl is sturdy and durable; it meets or exceeds all industry standards.
DuraLabel PRO Wire & Cable Labels
DuraLabel Shrink-Tubes
- Polyolefin shrink tubes are used for labeling wires before
they are terminated. Shrink tubes provides a durable, permanent wire label.
DuraLabel Wire Wraps
- Self-laminating wire wraps are used to label
wires and cables before and after they are terminated. In addition, they can be used to label larger diameter cables, cable bundles and for marking conduit.
DuraLabel PRO Low Light / No Light Tapes
 Reflective Tapes
- These DuraLabel supplies are used to make high visibility labels and signs that can be seen under low light conditions. The signs shown to the left have been photographed under low light conditions. The upper sign, made from reflective DuraLabel tape, is easier to see and read.
Reflective tapes are excellent for labels and signs that must be viewed from a distance; for parking lot and traffic control signs; and labels that are used in low light areas.
Phosphorescent Tape
- This is a glow-in-the-dark tape that provides information
when it is dark, such as during a power failure or other emergency. This tape is excellent for marking stairways and emergency exits.
DuraLabel PRO RTK & Arc Flash Labels
Arc Flash Labels - Both die-cut and continuous vinyl tapes are available for making arc flash labels. Die-cut labels are available in three languages. Continuous vinyl is available in two-colors, providing a white body and a header of a different color for the signal word.
 RTK Labels - are available using either the NFPA diamond or a color bar. Both styles are available in a variety of die-cut label sizes.
Die-Cut Labels
- These are labels that are cut to a preset size. In many cases they include
preprinted text, such as a WARNING or DANGER header.
RTK and Arc Flash labels are available as die-cut
labels. In addition, blank rectangle, circle and oval die-cut labels are available.
DuraLabel PRO Specialty Materials
 DuraLabel Valve Tags - Valves have irregular shapes that are difficult to label. DuraLabel valve tags (an example is shown to the right) provide a sturdy base on which labels can be attached. The tags can be attached to valves, actuators, drives and other devices using a plastic or metal tie.
DuraTag Tag Stock - DuraTag tag stock is available on a continuous roll, allowing you to create tags of any size. DuraTags are so tough they don't need a grommet. Just punch a hole in the top of the tag, and attach the tag.
Other Specialty Labeling Materials - Other types of materials are available such as polyester tapes and low temperature tapes. Low temperature tapes have an adhesive that allows the label to be applied at temperatures as low as -10 degrees F. Give us a call for information about specialty supplies.
DuraLabel PRO Ribbons
DuraLabel Ribbons
- Industrial quality ribbons are available in
eight colors. In addition a black chemical resistant
ribbon is available for making labels that will
be used in harsh environments.
With DuraLabel PRO supplies you are purchasing direct from the manufacturer. This means you typically save 50% compared with supplies for comparable label printers. Give us a call today to learn more about how DuraLabel PRO supplies will save you money. |
