DuraLabel Label Printer & DuraLabel Supplies

The DuraLabel printer is fairly easy to use when loading supplies.

First install the correct ribbon. Various DuraLabel supplies may require different ribbons. Ribbons are typically identified by a color dot inside the ribbon core.

To install DuraLabel supply tapes set the green guides, located inside the machine, to a width slightly greater than the tape width. Mount the roll of label material on the holder, but do not install it. Instead pull off about a foot of tape and then place the roll (and mount) inside the open cover. Feed the tape through the green guides and out through the slot in the front of the machine.

Now place the supply holder into the DuraLabel printer and roll up any slack in the tape.

Close the DuraLabel's cover and turn on the machine. If you are using die-cut DuraLabel supplies, you will need to calibrate the gap and have the machine detect the gap before starting to print labels.

Labels: DuraLabel Supplies