 |
|
|
|
|
| |
DuraLabel 9000 Printer Specifications
1.1.1 Printer
- Type: Thermal transfer & Direct Thermal
- Print speed: Up to Four inches per second
- Resolution: 300 DPI
- Sensors:
- Adjustable Reflective Sensor
- Transmissive Gap Sensor
- Head Open Sensor
- Heater Element Diagnostic Sensor
- Transmissive End Sensor (Transparent Supply Only)
- Automatic Cutter
- Safety Compliance: CE,FCC Class A
- Environmental Compliance: RoHS, WEEE
1.1.2 Printing
- Print Length:
- Minimum 1 " (25.4mm)
- Maximum 50 " (1270mm)
- Print Width: Maximum on 9 inch supply (228.6mm)
- Resident Fonts:
- 8 Alpha-Numeric Bitmap fonts
- Monotype Imaging True Type Font Engine
- 14 CodePages
- Barcodes Included:
- 21 - 1D bar codes
- 4 - 2D bar codes
- Core Diameters:
- Supply - 3.0" (76.2mm)
- Ribbon - 1.0" (25.4mm)
1.1.3 Indicators and Buttons
- Display: Graphic type with backlight (122 x 32 pixels)
- Three Single Color LEDs - Power, Online and Error
- Buttons:
- Menu
- Pause
- Feed
- Up
- Down
- Select
- Switches: Power, on Back
1.1.4 Communications & Memory
- Connections:
- USB 2.0
- Standard Serial Port
- Standard Parallel Port
- SD Card Slot
- Memory:
- 8 MB Flash
- 32 MB SDRAM
- SD Expansion Slot
- CPU: 32 bit, 200 MHz
1.1.5 Power Requirements
- Input: AC 115V/230V, 5A/3A, 50Hz/60Hz
- Worldwide voltage compatibility
1.1.6 Environment
- Operating temperature: 41 - 104°F (5 ~ 40°C)
- Storage temperature:: -40 - 140°F (-40 ~ 60°C)
- Operating Humidity: 30 - 85% non-condensing
- Storage Humidity: 5 - 90% non-condensing
- Ventilation: Free air movement
1.1.7 Printer Body
- Weight: 48.4 lbs (22 kg)
- Dimensions W 18.5" (470mm) x H 13.8" (350 mm) x D 21.65" (550mm)
- Composition: Cast Aluminum Components and Core; Sheet Metal Outer Case
|
|
|
|
|
